Magnetic Materials Industrial Sintering Furnace For Ceramic Sintering

High Temp. Bell Furnace 1740*2780*2505mm W*H*D for Ceramic Sintering within Chitherm Bf125-17

This equipment is mainly designed for electronic ceramic materials, magnetic materials, ceramic filters, etc. requiring high uniformity of temperature field or multi-species small batch production occasions.

• Rated Temp.: 1600ºC
• Max Temp.: 1700ºC
• Effective Dimensions: 550mm*500mm*550mm(D*W*H)
• Heating Method: U-shaped silicon molybdenum heater
• Thermocouple: R-Type
• Temperature Control: 1 Point
• Temp. Set Accuracy: ±1ºC (flat temp. insulation)
• Temp. Control Mode: control module imported from Japan with PID
• Heat-up Rate: 400 ~ 1000≤5ºC/min, 1000 ~ 1500≤2ºC/min
• Temp. Uniformity: ±5ºC (empty furnace insulation test 2hours under 1500ºC)
• Maximum Lifting Trip: 800mm
• Lift System: Three-point control, can be stopped at any time, stable and reliable operation
• Loading Weight: ≤1000kg (with firing furniture and products)
• Exhaust System: 1 exhaust chimney at the top for exhaust gas emission
• Alarm System: Over-temperature, broken couple, overload, over-range, deviation and other sound and light alarm protection function
• Maximum Heating Power: 50kW
• Insulation Power: ≤25kW
• External Dimensions: 1740*2780*2505mm(D*W*H) (without control cabinet)
• Appearance Color: Light gray

• Environmental Conditions: Temperature: 0~40ºC, humidity≤80%RH, no corrosive gas, no strong airflow disturbance
• Atmosphere Conditions: Dry, clean, oil-free compressed air, working pressure of 0.2-0.4MPa, gas consumption of 10-30 m³/h
• Ventilation System: Non-contact access to user pumping system, pumping capacity >35 m³/h
• Ground Requirements: Horizontal, no obvious vibration, load-bearing>600 Kg/m²
• Power Condition: Capacity >70kVA, 3-phases 5-lines, voltage 220/380V, frequency 50Hz
• Installation Site: 3800mm*2650mm*3500mm(D*W*H), installation area >12m²